The right PLC simulator depends on what you are practising for. To learn ladder logic from zero, a browser simulator with built-in machines gets you writing real logic in minutes. For free, vendor-neutral practice, CODESYS and OpenPLC are the strongest options. If a job requires Siemens or Allen-Bradley, learn on that vendor's own simulator, and add Factory I/O when you want a realistic 3D machine to control.
This guide compares nine PLC simulators, free and paid, by what each one actually simulates, what it runs on, how it is priced and who it suits. Prices were checked on 21 November 2026. Siemens and Rockwell sell their simulators through licences and distributors rather than a public price list, so for those we describe the pricing model rather than quote a number that may not apply to you.
What does "PLC simulator" actually mean?
The phrase covers three different kinds of software, and mixing them up is the usual reason people buy the wrong one.
- Emulators run your program the way a specific real controller would. Siemens S7-PLCSIM and Rockwell's Logix Emulate are in this group. They are what you use to test a real project before it goes on real hardware.
- Training simulators come with their own PLC and their own machines: a door, a conveyor, a traffic light. You write logic and watch it move something. LogixPro, PLC Fiddle and browser simulators sit here. They are the fastest way to learn, but the instruction set is a simplified version of the real thing.
- Process simulators model the machine, not the PLC. Factory I/O is the best known. You connect it to a PLC or an emulator, and your code drives a 3D factory with sensors, conveyors and sorters.
Most people end up using two: something to run the logic, and something for the logic to control.
How do the 9 PLC simulators compare?
| Simulator | Type | Runs on | Languages or brand | Price model | Best for |
|---|---|---|---|---|---|
| CODESYS | Development system with simulation | Windows | IEC 61131-3, vendor-neutral | Free | Free, standard-based practice |
| OpenPLC | Open-source runtime and editor | Windows, Linux, macOS, Raspberry Pi | IEC 61131-3 | Free, open source | Cheap real I/O at home |
| Siemens S7-PLCSIM | Emulator | Windows, inside TIA Portal | Siemens S7-1200 and S7-1500 | Paid licence, trial available | Siemens jobs and projects |
| Rockwell Logix Emulate / Logix Echo | Emulator | Windows, with Studio 5000 | Allen-Bradley Logix controllers | Paid licence | Allen-Bradley jobs and projects |
| Factory I/O | 3D process simulator | Windows | Drives Siemens, Allen-Bradley, Modbus and OPC controllers | Paid, 30-day trial | Realistic machines to control |
| LogixPro | Training simulator | Windows | RSLogix 500-style ladder | Low one-time licence, demo | Allen-Bradley ladder basics |
| Do-more Designer | Programming software with simulator | Windows | AutomationDirect Do-more | Free | A free brand-specific simulator |
| PLC Simulator | Browser training simulator | Any browser | 9 PLC styles, from IEC to Allen-Bradley and Siemens | Free tier, Pro $29/month | Learning from zero, no install |
| PLC Fiddle | Browser ladder sandbox | Any browser | Basic ladder | Free | A quick ladder experiment |
Which free PLC simulators are worth using?
1. CODESYS
CODESYS is the most complete free option. The development system is free to download (you need a free CODESYS Store account), it supports all the IEC 61131-3 languages (ladder, structured text, function block diagram, sequential function chart and instruction list), and it has a simulation mode that runs your project on your PC with no hardware attached. Many controller makers build on CODESYS, so what you learn carries over to real hardware from several brands.
The catch is the learning curve. CODESYS is an engineering tool, not a tutorial. There are no built-in machines to control, so on its own you are toggling variables and watching values change. Pair it with Factory I/O, or with a simple visualisation you build inside CODESYS, to make it feel real.
Best for: anyone who wants free, standard-based practice that looks like real industrial work.
2. OpenPLC
OpenPLC is an open-source PLC runtime with its own editor. You write IEC 61131-3 programs on your PC and run them on the PC itself, on a Raspberry Pi or on supported microcontroller boards, which makes it the cheapest way to wire up real buttons, lamps and relays at home. It speaks Modbus, so it can also drive Factory I/O or a home-made HMI.
Like CODESYS, it ships without machines to control, and the editor is plainer than the commercial tools. Where it shines is the step from simulation to real wiring, for the price of a single-board computer.
Best for: hobbyists and students who want to move from screen to real I/O without buying an industrial PLC.
3. Do-more Designer
AutomationDirect's Do-more Designer is the free programming software for its Do-more PLCs, and it includes a full simulator that runs on your PC without a connected CPU. If you want a free simulator that behaves like one real brand's hardware, this is the easiest to get hold of.
The limit is that it only simulates Do-more controllers. The skills transfer, but the code does not run on Allen-Bradley or Siemens.
Best for: learners who want a free, brand-specific simulator, or anyone already using AutomationDirect hardware.
Which PLC simulators do Siemens and Allen-Bradley jobs expect?
If a job advert names a platform, practise on that platform's own tools. These are paid, licensed products, usually bought alongside the programming software.
4. Siemens S7-PLCSIM
S7-PLCSIM simulates S7-1200 and S7-1500 controllers inside TIA Portal, so you can download a project to a virtual CPU, go online, watch tags and debug exactly as you would on hardware. PLCSIM Advanced goes further and creates a virtual controller other software can talk to, which is how you connect it to Factory I/O or test communication with an HMI.
Both are licensed Siemens products, and the price depends on the TIA Portal package and edition you buy. Siemens offers a time-limited trial of TIA Portal, which is the practical way to try it before you commit.
Best for: anyone working towards Siemens projects, or testing real TIA Portal code before commissioning.
5. Rockwell Logix Emulate and Logix Echo
For Allen-Bradley ControlLogix and CompactLogix work, Rockwell's emulators are Studio 5000 Logix Emulate and its newer successor, FactoryTalk Logix Echo. They run your Logix Designer project on a virtual controller on your PC. Both need a Rockwell licence, and recent versions of Logix Designer point users to Logix Echo.
For the smaller Micro800 range, Connected Components Workbench is free and Rockwell lists a Micro800 simulator for it. Users report mixed results with offline simulation, so check what your version includes before you rely on it.
Best for: engineers and students aiming at Allen-Bradley Logix work, where Studio 5000 is the tool on the job.
Which simulators help you learn fastest?
6. PLC Simulator (browser)
PLC Simulator runs entirely in the browser, so there is nothing to install. You write ladder logic or structured text and watch a machine respond, with a slow mode that steps through one rung at a time so you can see the scan cycle. The free tier includes 32 scenarios and the first lessons of every track.
What sets it apart is breadth. The same lessons come in 9 PLC styles, including IEC 61131-3, Allen-Bradley, Siemens SCL, Mitsubishi, Omron, KEYENCE, Schneider and Delta, plus HMI, wiring, motor control and troubleshooting labs. The site is clear that these are educational subsets of each vendor's syntax, not firmware emulation, which is the honest way to describe it.
Pro is $29 a month, or less on the annual plan, and unlocks all 170 scenarios, graded projects and an AI tutor. Students and instructors get 50% off with a school email, and teams pay $199 per seat a year.
Best for: complete beginners and career changers who want guided practice today, and maintenance staff brushing up on troubleshooting.
7. LogixPro
LogixPro is a long-standing Windows simulator built around the RSLogix 500 style of Allen-Bradley ladder used on SLC 500 controllers. It comes with animated exercises, such as a garage door, a silo, batch mixing and traffic lights, that react to your logic. Many technical colleges have used it for years.
It is cheap, with a one-time licence and a free demo, but it shows its age, and RSLogix 500 is the older Allen-Bradley platform. It teaches ladder thinking well; it does not teach Studio 5000.
Best for: students on courses that use it, and anyone who wants classic Allen-Bradley ladder practice on a budget.
8. PLC Fiddle
PLC Fiddle is a free browser sandbox for ladder logic. You place contacts and coils, toggle inputs and watch outputs change. There are no machines, lessons or vendor instruction sets.
Best for: a five-minute experiment, or checking how a rung behaves while you read about it.
When do you need a 3D process simulator?
9. Factory I/O
Factory I/O gives your logic something real to control: 3D scenes with conveyors, sensors, sorting stations, pick-and-place units and more, all with the timing problems and sensor faults that make PLC work hard. It does not run PLC code itself. You connect it to a real PLC, to an emulator such as PLCSIM, or to CODESYS or OpenPLC, through its Siemens, Allen-Bradley, Modbus or OPC drivers.
It runs on Windows and has a 30-day free trial. Paid editions are grouped by driver family and sold as a one-time licence or a subscription, so pick the edition that matches the controller you will use with it.
Best for: anyone past the basics who wants practice that looks like a real machine, and instructors who want repeatable lab exercises.
Which PLC simulator should you choose?
You are starting from zero. A browser simulator such as PLC Simulator, because you write your first working rung in minutes and the machines make cause and effect obvious.
You want free and serious. CODESYS for programming, and OpenPLC once you want to wire real I/O. Add the Factory I/O trial when you are ready for a 3D machine.
A job asks for Siemens. TIA Portal with S7-PLCSIM, starting with the trial. Learn the general logic elsewhere first if the licence cost is a problem.
A job asks for Allen-Bradley. Studio 5000 with Logix Emulate or Logix Echo for Logix work. LogixPro is a cheap way to learn the ladder style first.
You teach a class. A browser simulator removes the install problem on lab PCs, and Factory I/O gives advanced students realistic projects.
Frequently asked questions about PLC simulation software
Is there a free PLC simulator? Yes. CODESYS, OpenPLC and Do-more Designer are free to download, PLC Fiddle is free in the browser, and PLC Simulator has a free tier with 32 scenarios. Siemens and Rockwell emulators are paid.
Can I learn PLC programming without hardware? Yes. A simulator teaches the logic, the scan cycle and troubleshooting. You will still want time on real hardware before commissioning a machine, mainly for wiring, safety and networking.
Is Siemens PLCSIM free? No. S7-PLCSIM is a licensed Siemens product used with TIA Portal. Siemens offers a time-limited TIA Portal trial, which is the usual way to try it.
Can I simulate Allen-Bradley PLCs for free? Partly. Connected Components Workbench is free for Micro800 controllers. For ControlLogix and CompactLogix, Logix Emulate and Logix Echo need a Rockwell licence. LogixPro is a low-cost way to practise the ladder style.
What is the difference between a PLC emulator and a simulator? An emulator runs your program the way a specific real controller would, for testing real projects. A training simulator has its own simplified PLC and built-in machines, for learning.
Does Factory I/O work with CODESYS or OpenPLC? Yes. Factory I/O connects through its Modbus or OPC drivers, so free runtimes like CODESYS and OpenPLC can drive its 3D scenes.
Where to go next
Start with the free tier of PLC Simulator if you have never written a rung, or download CODESYS if you already know the basics. For more practical tools, browse the SaaS and developer tools categories on StackLedge.
Built a PLC or automation training tool that belongs here? Submit it. A person reads every listing before it goes live.